I literally wrapped up a present I made for a very good
friend. I made my first ever batua (little purse or pouch) for her birthday and
slipped in a couple of jewelry peices she liked from my creations.
The batua is a little smaller than a rugby ball. Since this is my
first ever, there are tons of flaws in it but I've learnt from them and should
come up with something better next time!! *smiles*So here I am sharing the pic and wrapping up my
weekend.
The batua was so beautiful... that I had to request for a tutorial... So here goes.. And if do try it out... dont forget to share some pics with Harshita & me!!
You will need:
1. 2 x 28" diameter velvet fabric (non-stretchable variety) and preferably in contrasting colours
2. 1 x 28" diameter thing cotton fabric for lining the velvet.
3. 2 x 24" strong drawstrings.
Beads to make a tassel at the end of the drawstring.
Sewing machine
Thread spools of both colours (of chosen fabric)
Method:
- Place both velvet fabrics with the right sides facing each other and place the cotton fabric on it. All these should be aligned.
- Run a stitch leaving half an inch of seam around this and leave about 4 inches of this open so you can pull of the fabric and reverse it to have thevelvet on top.
- Once the fabric has been reversed, run a hand stitch (carefully to co-ordinate with the rest of the stitches) to cover the 4 inches you left toreverse the fabric.
- Once done, leave a further 3 and a half inches of seam and run 2 parallel stitches around the roundels you now have (this would resemble a quilt)
- At this stage I ran a clustered zig-zag on my sewing machine with the inner fabric colour for a wee sneak of the colour on the outside but you could add sequins, mirrors, rhinestones etc. Ensure you do not disturb the parallel stitches you ran as those are meant for the drawstrings to go through. Any stitches embroidery you make may block the passage.
- Once done, make eyelets to run your drawstrings. This has to be done between the 2 parallel stitches you made. I made 16 of these by snipping theouter fabric and the lining carefully. I then secured these eyelets ('cos of the fraying edges) with a button hole stitch.
- Once the eyelets are ready, run the drawstring through and out and secure them at the end by making bead, fabric, pom pom tassels. Anything that fancies you.
- Ta-da!
I thoroughly enjoyed the tutorial... I hope you did too!!! Dont forget the Weekend Wrap Up link is open till Wednesday... so go and join the party!!
